ANALYSIS OF THE IMPLEMENTATION OF RMK3L IN THE PADANG SICINCIN TOLL ROAD PROJECT

  • Dian Wahyoni Dewi Fitri Ekasakti University, Padang
  • Merry Thressia Ekasakti University, Padang
Keywords: construction, quality management system, green level

Abstract

The Construction and Environmental Occupational Safety and Health Quality Plan
(RMK3L) is an integration in the fulfillment of a quality management system in the form of ISO
450001 which is regulated in PUPR Ministerial Regulation No. 21 of 2019, occupational safety
and health in the form of OHSAS 18001: 1999 has the same components in SMK3 which is
regulated in PP No. 50/2012, as well as environmental management, namely ISO 14001 which
is applied in field construction activities, which is useful for seeing, examining, reviewing,
assessing, measuring effectiveness, knowing the obedience or compliance of officers during
the project. This research was conducted to answer how the RMK3L standards and guidelines
were used in the Padang Sic Cincin Toll Road project and how the effect of implementing
SMK3 for companies and workers. Data analysis was carried out by compiling and discussing
data from the interviews with SMK3 officers and the results of field observations and from the
results of the evaluation of SMK3 data available during observation and literature study as
supporting data. Based on this research, it was concluded that the RMK3L had been well
planned and implemented in the project location with a percentage of 88% with implementation
at the green level. The standards and guidelines used to govern this system are compiled in the
Project Quality, Safety and Health and Environment Plan (RMK3L). The basis for
implementing these procedures is adjusted to international standards, namely the Occupation
Health and Safety Management System (OHSAS) 18001: 1999 which has similarities with
SMK3 as regulated in PP No. 50/2012. The implementation of SMK3 has a good effect on the
company and the workforce, this can be seen from the number of workers who have
experienced accidents or occupational diseases which are still relatively low and do not have
a significant effect on work implementation.

References

A Syukroni, 2007. Pengukuran Tingkat Implementasi Sistem Manajemen Keselamatan, Kesehatan Kerja & Lindungan Lingkungan (SMK3LL) Pada Lingkungan Industri Kecil di Semarang

Asfahl, C.R, 1999. Industrial Safety and Health Management; Prentice Hall, New Jersey

Arif Rahman, 2004. Pengukuran Tingkat Implementasi Program Keselamatan dan Kesehatan Kerja (K3); Proseding Seminar Nasional Ergonomi, Aplikasi Ergonomi dalam Industri, ITS, Surabaya

Cholid narbuko dan H abu achmadi, 2007, Metodologi Penelitian, Jakarta

Febiana Pangkey, 2012. Penerapan sistem manajemen keselamatan dan kesehatan kerja (SMK3) pada proyek konstruksi di Indonesia Healt, Safety & Environment (HSE) Pertamina Dit. Pemasaran dan Niaga, 2005. Checklist Audit SMK3LL untuk Lokasi di Lingkungan PMS dan Niaga; April, Jakarta

Hysein umar, 2005. Metode Penelitian Untuk Skripsi, Jakarta

Kurniawijaya M, 2010. Teori dan aplikasi kesehatan kerja, Jakarta, UI

Luthfi Parinduri, 2020. Implementasi Manajemen Keselamatan Kesehatan Kerja Dalam Pendemi Covid 19

Sastrohadiwiryo, siswanto, 2009. Manajemen Tenaga Kerja, Bandung

Silalahi, Bannet MA, DR Rumondang B MPH, Manajemen keselamatan dan kesehatan kerja, PT pustaka, 1985

Subagyo, Yoyo. 2009. Apa dan Bagaimana Cara Menerapkan OHSAS 18001 – Manajemen K3

Tarwaka 2008. Sistem Manajemen dan Standar Pemeriksaan Keselamatan dan Kesehatan Kerja (K3), Panca Bhakti, Jakarta

Permen PUPR No 21 Tahun 2019 tentang Sistim Keselamatan Konstruksi

Published
2021-05-11
How to Cite
Dewi Fitri, D., & Thressia, M. (2021). ANALYSIS OF THE IMPLEMENTATION OF RMK3L IN THE PADANG SICINCIN TOLL ROAD PROJECT. INTERNATIONAL CONFERENCE ON GLOBAL EDUCATION, 999-1018. Retrieved from https://ejurnal.unespadang.ac.id/index.php/ICGE/article/view/79
Section
EDUCATIONAL CREATIVITY